On this page
  1. What database reactivation is (and is not)
  2. Step 1: clean the list before you write a word
  3. Step 2: check consent before the first send
  4. Step 3: run a 3-message sequence, not one blast
  5. Step 4: make the booking link do the work
  6. Step 5: measure what matters (replies, bookings, attended visits)
  7. Common mistakes that waste the list
  8. Where DrKing fits
  9. FAQs

Key takeaways

  • Reactivation works your own list, so the first job is cleaning it: remove duplicates, dead numbers and anyone with a future booking.
  • Check consent before the first message goes out, and put a working opt-out such as Reply STOP in every message.
  • Run a short 3-message sequence with different reasons, not the same reminder repeated.
  • Measure replies, bookings and attended visits per segment, not sends.
  • Keep clinical details out of SMS and email previews and let the clinician decide anything about care.

Every dental practice has a quiet asset sitting in its practice software: patients who chose you once and have not been back for a year or more. Database reactivation is the disciplined version of "we should contact those people". Done well, it is a planned campaign with a clean list, verified consent, a short message sequence and numbers you actually review. Done badly, it is one bulk text that gets ignored and burns goodwill.

The short answer: export or view your inactive-patient list, clean it, confirm you have consent to send marketing messages, run a three-message sequence spread over a few weeks with a direct booking link, and measure replies, bookings and attended visits rather than message volume. This article walks through each step, with templates you can adapt. It is written for dental practices first; the same structure suits GP and allied health practices with recall-style care.

What database reactivation is (and is not)

Reactivation is different from a recall. A recall targets patients who are still roughly on cycle, for example a six-monthly check-up reminder. Reactivation targets people who have already fallen out of that cycle, and it treats them as individuals with reasons, not as a number on a report.

Patients drop off for ordinary reasons: cost pressure, dental anxiety, moving house, a new baby, a job change, or simply forgetting. None of that means they have decided against your practice. The campaign's job is to make returning easy, not to make anyone feel guilty about the gap.

Keep it respectful

Never use shame or scare wording. "You're overdue and at risk" language reads badly and, if your message counts as advertising under Ahpra's rules for regulated health services, urgency that could encourage unnecessary use of health services is specifically cautioned against. A calm invitation works better and is safer.

Step 1: clean the list before you write a word

The fastest way to ruin a reactivation campaign is to send it to a dirty list: duplicates, old mobiles, patients who moved interstate, and people who already told the front desk they now see someone else. Cleaning takes an afternoon and saves weeks of cleanup afterwards.

  1. Export or viewPull inactive patients from your practice software, filtered by your last-visited window.
  2. Remove duplicatesSame person, two records. Merge rather than delete where you can.
  3. Fix dead contactsFlag numbers that have failed before; do not pay to text a dead line.
  4. Exclude bookersAnyone with a future appointment, a recent visit or an open treatment plan gets a different message.
  5. Exclude opt-outsAnyone who has said no, by any channel, comes off the list permanently.

Segment what is left. The most useful split is simple: when was their last attended visit? Twelve to eighteen months reads differently from three years ago, and a patient who accepted treatment but never booked needs different wording again. If you have not defined your inactive bands yet, the sibling guide on inactive dental patients walks through 6, 12, 18 and 24 month windows.

1 listOne cleaned, deduplicated inactive list is the whole campaignPractice-defined
2–3 bandsGroup by last attended visit so wording can match the gapPractice-defined
0Patients who opted out, ever, by any channelPractice-defined

In Australia, commercial electronic messages — including SMS that offers or promotes your services — are covered by the Spam Act 2003. The Australian Communications and Media Authority (ACMA) sets out three things a sender must do: have consent, identify the sender with contact details, and include a working way to unsubscribe.

ACMA distinguishes two kinds of consent. Express consent is the person knowingly agreeing to receive marketing from you, for example by ticking a box on your new-patient form. Inferred consent may apply where someone knowingly gave you their number in the course of an ongoing relationship and would reasonably expect messages from you. Inferred consent is less reliable, and under the Spam Act it is up to you to prove you had consent if asked. ACMA also requires that a request to unsubscribe is honoured within five working days, at no cost, and that the unsubscribe option stays functional for at least 30 days after a message is sent.

On the privacy side, the Office of the Australian Information Commissioner's guidance on direct marketing (APP 7 of the Australian Privacy Principles) requires a simple opt-out in each direct marketing communication, and separate consent before using sensitive information for direct marketing — which is broadly relevant for health information. Practical translation: keep health details out of your marketing messages and previews, keep a record of how and when consent was given, and make opting out easy and permanent.

  • Do you have express consent on file, or a documented basis for inferred consent?
  • Does your new-patient form (and online booking flow) include a clear marketing consent line?
  • Is there one central opt-out list that every campaign checks before sending?
  • Does every message identify your practice and include a contact detail?
  • Does every message include a working opt-out such as Reply STOP?
  • Is there a process to action opt-outs within five working days?
  • Are clinical details kept out of message text and preview lines?
Not legal advice

This is general information for practice owners, not legal advice. If your situation is unusual — a purchased list, a merged practice, a patient who moved between your locations — check with your association or a lawyer before sending.

Step 3: run a 3-message sequence, not one blast

One message reaches the people who were ready that day. A short sequence with different reasons reaches the rest, because each message answers a different reason for drifting away: convenience, timing, and a specific reason to come in now. Space the messages roughly a week apart, cap at three, and stop the moment someone books, replies no, or opts out.

Message 1 — the easy rebook

Hi [First name], it's [Practice] Dental. It's been a while since your last visit — would you like us to find a time that suits? You can book in 60 seconds here: [booking link]. Reply STOP to opt out.

9:41 AM

Hi, yes please — Thursdays work best for me.

10:02 AM

If there is no reply, the second message changes the reason, not the tone. Common angles: before-year-end health fund extras, school-holiday timing for families, or simply a smaller first step such as a check-up rather than the full treatment conversation.

Message 2 — a different reason

Hi [First name], no reply needed — if timing was the issue, we have after-school and early-morning options this month at [Practice] Dental. Grab a time here: [booking link]. Reply STOP to opt out.

4:15 PM

The third message is the last one, and it should be easy to say no to. A plain "this is our last message unless you'd like to hear from us" respects the reader and protects the list for the next campaign.

Clean list3 messagesRepliesBookingsAttended
Figure: each stage narrows — measure replies, bookings and attended visits separately, not just sends.

Every message should land somewhere that can turn a maybe into an appointment while the reader is still holding the phone. A generic "call us" link makes the reader do the work; a direct online booking link with a sensible default appointment type does it for them. Three details matter more than the wording of the message:

Do

  • Link straight to booking, pre-filtered to check-up or the offer's appointment type
  • Show real availability, including the quiet times you want filled
  • Keep the sender name and link consistent with your practice's other messages

Avoid

  • "Call the practice to book" as the only option
  • Countdown pressure or urgency wording in a health context
  • Sending patients to a generic homepage and hoping they find the button

Have a human ready for replies. A patient who answers "Thursdays work best" should get a booked time, not another automated nudge. Route replies to one inbox and answer them like any front-desk conversation — that is where the campaign actually converts.

Step 5: measure what matters (replies, bookings, attended visits)

Sends are not results. The numbers worth a monthly review are the ones the funnel above shows:

  • Replies per band — how many patients answered each message
  • Bookings per band and per message — which wording actually converts
  • Attended visits — the only number that changes chair time; a booking that no-shows restarts the problem
  • Opt-outs and replies that said no — rising here means the list or the wording needs work

Compare bands against each other rather than chasing industry benchmarks: your 12–18 month band should behave differently from your 3-year band, and your own trend is the benchmark that matters. If you track enquiries and conversions already, reactivation deserves its own line so it is not buried in general campaign numbers — the measurement definitions are the same ones used for source and conversion tracking.

  1. Week 1Clean and segment the list; confirm consent records and the central opt-out list.
  2. Week 2Send message 1 to the first band; staff the reply inbox; fix booking-link friction as it appears.
  3. Week 3Send message 2 to non-responders; note which reasons draw replies.
  4. Week 4Send the final message; review replies, bookings, opt-outs; carry learnings into the next band.
  5. MonthlyReview attended visits by band, then decide the next segment and theme.

Common mistakes that waste the list

  • Texting everyone at once. A full-list blast swamps the reply inbox and pushes patients through the same message regardless of their reason.
  • Reusing the same wording three times. If message 2 says the same thing as message 1 with a different date, it reads as nagging.
  • Ignoring replies for a day. Interest cools fast; staff the inbox or set reply routing before the first send.
  • No attended-visit tracking. Counting bookings only flatters the campaign; attendance is what matters.
  • Skipping the opt-out check. One message to someone who already opted out costs more goodwill than the campaign earns.

Where DrKing fits

DrKing gives Australian dental practices one inbox for all patient conversations, plus SMS and email campaigns with a 12-month campaign calendar and monthly database reactivation built in — so the list, consent checks, message sequence and reply handling live in one place instead of a spreadsheet and a shared phone. Missed-call text-back, appointment reminders, online booking and source and conversion tracking support the same loop. Campaign wording, consent records and anything clinical stay under your practice's control, and system links depend on your practice software setup. If you want to see how this looks for your list, see how DrKing works for dental practices or book a demo.

Sources

  1. Avoid sending spam — Australian Communications and Media Authority (ACMA)
  2. Promoting your business by email or text messages — business.gov.au
  3. Chapter 7: APP 7 Direct marketing — Office of the Australian Information Commissioner (OAIC)